Making Boot Screen of Dreambox

You can use the software of TMPGEnc PLUS2.58 to make DM500 boot screen, the TMPGEnc PLUS is a versatile MPEG encoding / tools, it supports VCD, SVCD, DVD and other formats, it is used to convert static images to dynamic video, and this is in line with the requirements of DM500抯 boot screen format.

Installing the TMPGEnc PLUS2.58 from the Internet to download the finished version in your computer, it will appear as shown in Figure l interface after Double-click to run the software, click the "Input image " to the right of "Browse" button, select a picture which you like, the pictures must not exceed the maximum resolution of 720 ?576, if it do not meet requirements you can adjust it through software such as PhotoShop or ACDSee. The click the "Settings?button which is on the lower right corner of the main interface, then go into the interface of the MPEG to set, setting it to. MPEG 1720 X 576 4:3 PAL system quote rate of 25 rate 1000kbit/sec ". Finally, press the "Start" button, and you can video files which the extension are "m1v", at last, rename the file with the name of "newbold", And with the DCC software input the newbold file uploaded to the satellite TV receiver DM500 "/ tmp" directory for being used.

Receiver is installed through the network to the DM500 video EasyLogo with dynamic plug LOG0, if installing over a network is not convenient, it can also be installed manually. The method is: Using your computer find EasyLogo1 archive online, after unzipping you can obtained two documents of "easyLogo.so" and "easyLogo.fcg", then upload these two files to the DM500 receiver抯 "/ var / tuxbox / plugins" directory through DCC software, at this time you can press the "yellow button " of the remote control and it will be able to run EasyLogo plug. It can be seen that there are three options from the plug-in interface after the plug-in has been ruined, the first option is to grab the current image and save it to use "/ tmp" directory of DM500S, and the second option is to replace Flash in the boot screen, it can be carried out by pressing the "red button ", at this point the boot screen will be changed with the file which was upload into the directory of plug EasyLogo "/ tmp". Then press the "green button" to exit EasyLogo plug-in, you can see the new boot screen after restarting DM500s.