Arduino Buying Guide: Which Board Should You Get?

There are so many different kinds of Arduino boards out there, you’d be forgiven for being confused. Which should you buy? Which is more suited to your project? Let us help, with this Arduino buying guide for beginners!

This guide is also available in video form:

There are literally hundreds of different kinds of Arduino and Arduino-compatible boards out there, so we couldn’t possibly cover them all. What we can do though, is talk about the most common, the most useful, and the most widely supported.

Before we begin, if all you’re looking for is a table of numbers, check out Sparkfun’s Arduino list. I’ll be tackling this from a different viewpoint: that of an Arduino beginner, looking for your first development board or after having graduated from your starter kit.

Clone Wars, and Arduino vs Arduino

A quick note before we begin. Prices are correct at the time of writing, and where possible, links are to AliExpress, where you can buy Arduino-compatible clones for a fraction of the price of branded Arduino models.

It’s important to understand that these aren’t “cheap Chinese knock-offs”, at least not in any illegal sense. Most Arduino hardware is released under an open source license, which means anyone is free to build their own copies (and even add features not present in the original design) as long as they label it as “Arduino-compatible”, and not “Arduino” (which is trademarked).

If you purchase an original, branded Arduino, a large portion of what you pay is donated to the Arduino foundation, which goes to fund educational outreach programs, and further development of the brand. The situation is made a little messier however by a recent trademark dispute in which the “original” Arduino LLC (the one that owns Arduino.cc and you’re probably most familiar with) may only use the trademark Arduino in America, and has been forced to rebrand as Genuino outside of the US. If you’re buying a branded Arduino in Europe then, chances are that you’re actually paying the money to Arduino SRL (Arduino.org), the Italian company originally known as Smart Projects, which used to exclusively handle the manufacturing side of the business.

Like I said – it’s messy – and you’ll save yourself a lot of money if you just buy clones.

With that out of the way – please don’t start a comment war on this – let’s get started.

Uno

With clones costing less than $3, the Uno, while not the first Arduino board, remains the most popular. It’s also the model you’ll find included with most starter kits, and there’s a good reason for that. It’s the Uno that’s now the standard format for upgrade “shields”, which are boards that offer additional functionality you can plug onto the top, and can often stack with each other.

arduino guide - uno

About the size of a credit card, it has 14 digital IO pins and 5 analog, and runs off 5v. It can be powered either by the USB cable or up to 12v DC via a barrel jack.

At the heart of the Uno is the ATMEGA328P, with 32Kb of program memory, which is small by today’s standards. At some point you’ll probably hit that limit, but as a starter device to learn from, the Uno is perfect.

Leonardo

Looking deceptively similar to the Uno is Leonardo, though the two are quite different. Although the Leonardo does have the advantage of being able to emulate a USB device so you can make your own keyboard for instance, it also has a number of quirks and isn’t compatible with all Arduino shields.

Arduino Leonardo with Headers ATmega32u4 Microcontroller
Price: $24.95 Buy Now at Amazon.com

I’d advise that beginners stay away from the Leonardo: you’ll just find something isn’t quite right with your code, and when you go in search of help, you might not find the solution. If you do want the ability to present as a USB device then you’ll probably want to grab a Pro Micro instead, which we’ll look at later.

Mega 2560

The Mega is the next logical step up from the Uno, and if you find yourself hitting that memory limit or indeed running out of IO, then you’ll want to grab a Mega. Although twice the price of an Uno at about $6 for a clone, the Mega has 256k of memory, along with a whopping 53 digital IO and 15 analog ports.

arduino guide - mega2560

Like the Uno, it runs at 5v and has a built-in USB port and DC power converter, so it’s really just useful when the Uno isn’t big enough. The Mega is also compatible with most Arduino shields.

Pro Micro

With clones available for about $4 each, the Pro Micro is both physically tiny and has an onboard USB driver with the ability to become a USB HID (Human Input Device): this means you can make your own keyboard or game controller projects.

It’s great for small projects, though this does leave you with a couple less IO pins to play with; a total of 18, some of which can be analog, and only 32Kb of memory.

arduino guide - pro micro

Unlike the Uno, it’s breadboard friendly, so you can solder some headers on and it’ll fit neatly into a breadboard. It comes in both 5v and 3.3v versions, so you can pick whichever is more appropriate for your project.

There’s also a Pro Mini or Nano available in a similar tiny form factor, but they don’t have a built-in USB driver, and can’t emulate a USB device. I’m going to skip right over these because you’ll probably already know if you want one, and if not, you’re better off getting the Pro Micro given the tiny price difference. One reason you might want to look into a $2 Nano is if you’ve got your project finished and just want to stuff it into a tiny box and be done with it.

NodeMCU / ESP8266

This isn’t actually an Arduino, but it is Arduino-compatible with a small modification to your software. Available for as little as $5, I’ve previously called the Arduino-compatible NodeMCU development board “The Arduino Killer“.

As well as a good amount of memory for your program (1Mb with v2, 4Mb with v3), NodeMCU includes built-in Wi-Fi functionality with the ESP8266 chip. With just a few lines of code, you can have an Internet-connected device. For this reason, it’s perfect for Internet of Things projects, such as cheap smart home sensors or a remote control.

arduino guide - nodemcu

The only downside to working with NodeMCU is that it runs off 3.3v and the pins are not 5v tolerant, which means you’ll need either sensors designed specifically for that voltage, or a logic level shifter (which changes a 5v signal to a 3.3v one, and vice versa). By the time you’ve graduated from the Uno in your starter kit, this probably won’t be a concern for you.

Lilypad 328

At about $4 each, the Lilypad is a bit of a weird one: a 5cm circular board, designed for wearable projects. Instead of pins, you get circuit pads ideal for sewing with conductive thread. The Lilypad uses the same processor as the Uno so it’s just as limited, with 14 digital IO pins and 5 analog, but is also 5v tolerant so should be compatible with any Uno project you find. Make sure you buy the Lilypad 328 version though, not the 168, and bear in mind you’ll also need to buy a separate USB FTDI breakout since it doesn’t include one.

arduino guide - lilypad

Non-Atmel Boards

The various Atmel chips at the heart of the Arduino boards listed so far are what makes Arduino projects so portable – generally speaking, that project for Uno is going to work just fine on the Nano or the Lilypad. The same cannot be said of the non-Atmel based boards of late. The Yún is a curious hybrid that contains both an Atmel Atmega 32u as well as a full Linux stack, Bluetooth and Wi-Fi on a separate Atheros processor. These bear more resemblance to a Raspberry Pi, but with a whole lot less community support and a bigger price tag. The Yún is currently on sale for a cool $80.

Arduino Yun ATmega32U4 microcontroller and Atheros AR9331 (Linux part)
Price: $74.16 Buy Now at Amazon.com

My advice: steer clear of these new boards. They’re simply overpriced for their intended IoT uses considering the competition from a $35 Pi (our Raspberry Pi Guide), or even the NodeMCU board.

Those are the boards that I think as a beginner just starting out or graduating from your starter kit you’ll probably be the most interested in. In most cases for simple prototyping, you’ll probably just want another Uno; or for bigger projects, a Mega. I still use Unos all the time just because they’re cheap and so easy to work with.

If you’re ready to embed your finished project, consider a Nano. For anything involving emulating a USB keyboard or making a game controller, grab a Pro Micro. For wearables, you can prototype on a Uno and then switch to using a Lilypad once everything is ready. For Internet of Things devices I would strongly suggest the Arduino-compatible NodeMCU board instead of a “real” Arduino.

Which Arduino will you use next? Can you think of any use cases I haven’t listed, or would you make a different recommendation? Let me know in the comments!