How can you reseal video games
How can you reseal video games
- First thing you need is to go and get some commercial grade clear packing tape.
- Then you need hard type clear cellophane the kind used for crumpled party favors, a hairdryer, a nontoxic glue stick, q-tips or cotton balls, and some petroleum jelly (unscented) the kind with alcohol as it will need to evaporate the excess.
- You will need to lay out the cellophane like your wrapping a present only overlapping ma-by 1/2 an inch on all sides be sure to crease it so you can match it up after.
- Now using a Q-tip or a cotton ball dampen it so the petroleum jelly wont stick to it.
- Spread it evenly all over the cellophane about 1/2 a mill thick all over, this will allow for a perfect alignment when sealing.
- Now clean the box with Rubbing alcohol and cheese cloth to remove any lint or dust.
- Place the box carefully onto the cellophane.
- Line up all the creases and use a piece of the packing tape to temporary hold it in place.
- Use a glue stick and run it down the seams wiping off the excess with a tissue.
- Make sure all seams are as snug as possible and now using a hair dryer (a heat gun is too hot) with the heat on low blow the box till it seals and shrinks up nice and tight.
- This may take a few minutes to work as you won't want to melt the cellophane.
- Wipe it down, then you're done.