How do you host Wc3 using the router 2wire

FOR 2WIRE: first Open CMD prompt under accessories and, then in the little black box type ipconfig and push <enter> stuff will come up. look for the <default Gateway> and the numbers next to it on the right, type the numbers as ###.###.#.### (your default ip) in the Internet Explorer browser and push <enter> then it will take you to your Internet screen. on the right should be your firewall settings push <firewall> then on the next screen on the top left push <firewall settings>, next you will need to know your firewall password. witch will be most likely on your Internet book that came with your service. after you have typed your password in there will be a Drop-down list of things, Click the computer you are on. after u do so typeAdd a new user-defined application and type in the name box Warcraft III1, and in the port To: and From: put in 6112. there will be 2 choices above them that will say TCP and UDP leave it on TCP and hit done or OK once u do so push at the bottom of the screen the button that says >back< and then click the other drop-down list above a scroll box and click <all Applications. then make sure it is on your computer again. and then click Warcraft III1 and click the button that says <ADD> , then push <DONE>. now if your WC3 is still running exit and reopen it. NOW YOU SHOULD BE ABLE TO HOST GAMES.... please rate this Link and if your on US West add -mr.blizz- and -files- (without the -) tis me :) again RATE THIS LINK PLEASE thank you